Join our newsletter and Follow our social outlets to keep up with promotions and discounts!
Everything online is discounted 10%
Welcome to Oasis Garden Hydroponics!
The Blueprint Controllerså¨ CO2 Generator Power Adapter is compatible with Blueprint Controllerså¨ CO2 Generators.
460889 is the replacement fan blade for the Ideal-Air Industrial Grade Humidifier 200 Pints (#700861). 460888 is the replacement fan blade for the Ideal-Air Commercial Grade Humidifier 75 Pints (#700860).
Store a large supply of carbon dioxide in a safe, portable container with our 20-pound all aluminum CO2 tank. Sold empty (you must fill with your own supply), the tanks stand 23.2" high and the slim design won't take up much space in your indoor grow room.
Get the best CO2 tanks available. In our tanks, the CO2 cylinder is produced from high st...
This heavy duty aluminum carbon dioxide tank is designed to hold CO2 and is great for use with a regulator, valve, CO2 controller or timer. With a plastic collar to prevent damage during shipping and use.
The aluminum tank is roughly half the weight of standard steel tanks while still producing reliable results. These tanks do not come filled a...
GrowControl replacement sensor cable, 15 ft (703150) male to male with molded plugs. GrowControl sensor extension cable, 15 ft (703152) or 50 ft (703154) male to female with molded plugs.
XA dual sensor-port expansion module for Agrowteks GC-Pro and GC-ProXL series controllers. Add two more sensor ports to GrowControl controllers by installing an XA module. GC-Pro and GC-ProXL controllers accept up to one XA module.
XD Eight-output expansion module for Agrowtek's GC-Pro and GC-ProXL series controllers. Add eight more outputs to GrowControl controllers by installing an XD module. GC-Pro controllers accept up to one XD module; GC-ProXL controllers accept up to three XD modules.
AgrowDose dosing pump for nutrient and pH buffer injection with GrowControl controllers and hydroponics sensors. Heavy duty pumps draw concentrated nutrient or buffer from any size stock tank and pump into reservoirs. 3/16 in I.D. tubing and durable motor handles thick and thin liquids. Tubing adapters and power supply included.
Agrowtek's Dual dosing pump offers two independent dosing pumps in one economical, easy to install package. Simply place the suction end of each pump tube into any size nutrient or pH stock tank (may be located above or below the pump) and route the outlet of the pump to your reservoir, mixing tank or even pressurized lines up to 30psi!
AgrowDose Quad dosing pump for nutrient and pH buffer injection with GrowControl controllers and hydroponics sensors. Four independent heavy-duty pumps in one enclosure with built-in relays for direct connection to a controller. Tubing adapters and power supply included.
Add bright, colorful display of sensor readings and quickly access control settings and manual overrides to GC-Pro and GC-ProXL controllers with Agrowtek's AgrowTouch screens. Without a touch screen, controllers are configured by software. Screen installs into front panel of controller by removing knock-out panel.
Precision aspirated climate sensors for Agrowtek,s GrowControl series controllers provide temperature, humidity and light (irradiance W/m2) readings; optional CO2 ppm sensor module installs into climate sensor. Aspirator fan with cleanable filter ensures accurate sensor readings. Includes a 15 ft sensor cable. One climate sensor per room.
GrowControl GC-Pro and GC-Plus precision aspirated climate sensor. Senses air temperature, relative humidity, light irradiance and CO2. Add a climate sensor to your GC-Pro to control two independent climate zones from one control system! Noise-proof sensor can be mounted up to 2000 feet away from the controller!
Carbon dioxide ppm sensor module installs into Agrowtek's climate sensors for GrowControl series controller's automatic CO2 injection and ventilation control features. Sensing range: 0-5000 ppm with automatic self-calibration.
Four relay-controlled outlets for banked equipment control with GrowControl series controllers. All four receptacles are operated simultaneously. Recommended for fans and small lighting loads. Rated at 120 Volt ac/15 Amps.
High quality lab-grade replacement probes for Agrowtek's hydroponics sensor kit. pH sensor probe is a waterproof 3 ft cable with BNC connection. 0-14 pH measurement range. Electrical conductivity (EC) sensor probe is a waterproof 3 ft cable with tinned leads for terminal block connection. 0-5000 microSiemens measurement range. Temperature sensor...
Agrowtek's GC-Pro controls up to three climate zones and two nutrient reservoirs. Complete control of temperature, humidity, lighting, CO2 (sensor optional), timers, dosing, irrigation and more! Includes two sensor ports, four discrete inputs, twelve outputs for relays and one basic climate sensor. Serial & Ethernet ports for free remote mon...
Agrowtek's GC-Pro controls up to four climate zones. Complete control of temperature, humidity, lighting, CO2 (sensor optional), timers, irrigation and more! Includes two sensor ports, four discrete inputs, twelve outputs for relays and one basic climate sensor. Serial & Ethernet ports for free remote monitoring software. Up to four (4) clim...
Agrowtek's GC-ProXL-E controls up to three climate zones and two nutrient reservoirs. Same great features as GC-Pro, with expanded hardware to handle more sensors and relays. Includes four sensor ports, eight discrete inputs, sixteen outputs for relays and one basic climate sensor. Serial & Ethernet ports for free remote monitoring software....
Agrowtek's GC-ProXL-Q-E controls up to four climate zones. Same great features as GC-Pro-Q with expanded hardware to handle more sensors and relays. Includes four sensor ports, eight discrete inputs, sixteen outputs for relays and one basic climate sensor. Serial & Ethernet ports for free remote monitoring software. Up to four (4) climate zo...
GrowControl Hydroponics sensor kit includes pH, electrical conductivity and temperature sensors for monitoring nutrient reservoirs and operating dosing pumps for automatic nutrient and pH control. GC-Pro & GC-ProXL dose up to eight parts nutrients and two parts pH per kit for re-circulating and drain-to-waste systems. 15 ft sensor cable incl...
Float switches connect to the GC-Pro controller and are an economical way monitor and maintain proper reservoir levels. Horizontal float switches are installed in the side-wall of a container. The lever arm deflects to sense the presence or absence of water. A magnet in the lever arm activates a reed switch inside the sensor body when the arm is...
GrowControl Rain Sensor is a high quality optical type rain sensor with no moving parts. The rain gauge senses water hitting its outside surface using beams of infrared light. It uses the same sensing principle used in millions of automotive rain sensing windshield wiper controls. Connect to GC-Pro or GC-Extreme controllers' digital inputs to cl...
Water-proof probe gland kit for pH, conductivity and water temperature probes. Install sensor probes into a pipe or custom manifold for reliable, leak-free measurement. Pipe-thread glands have a polymer seal that clamps around the probes. pH and EC probe glands are 1/2 in NPT and temperature probe gland is 3/8 in NPT.
MX1 forward/reverse motor controller allows Agrowtek̥s control systems to directly operate single-phase AC vent and shade motors 120-240Vac up to 8 Amps or 3/4 HP. Control opening and closing of vents and curtains with automatic control by wiring the MX1̥s input signal terminals to Agrowtek̥s controller outputs, or use the knob on the front of t...
MX1D forward/reverse motor controller allows Agrowtek̥s control systems to directly operate DC vent and shade motors 30VDc up to 8 Amps or 3/4 HP. Control opening and closing of vents and curtains with automatic control by wiring the MX1D̥s input signal terminals to Agrowtek̥s controller outputs, or use the knob on the front of the MX1D to manua...
Outdoor light irradiance sensor module connects to Agrowtek's SNS-W Weather Station Transmitter or SNS-BOB break-out board to the GrowControl control system. Weather-proof enclosure and electronics. Mount to a level horizontal surface for best results. Standard two-wire connection; up to 1000 ft from weather transmitter or break out board.
Four, six, eight or 12 dry-contact pilot relays for equipment control with GrowControl series controllers. Normally open independent contacts allow control of customer relays, contactors and HVAC signals. Removable base-mounted relays for easy maintenance. Terminals rated 120 Volt ac/5 Amps.
Relay-controlled outlet for equipment control with GrowControl series controllers. The RX1 is a single outlet that plugs into a wall and switches power to the RX1 outlet when operated. RX6 has six independent relay outlets and each one is operated separately. Save cost over multiple RX1 relays. Control power to plug connected devices such as fan...
Sensor break-out board enables connection of hard-wired analog sensors such as Agrowtek's: outdoor temperature sensor, outdoor light sensor, power monitoring sensor, liquid level sensor and standard Industrial 4-20mA sensors. Typical applications include utilizing the fourth channel that is un-used by the hydro transmitter or a basic climate sen...
USB to Serial adapter cable connects GrowControl controller's serial port to USB. Connect free GrowControl software to the controller̥s serial port, modify Ethernet IP address settings and perform firmware updates with the serial port.
Float switches connect to the GC-Pro controller and are an economical way monitor and maintain proper reservoir levels. Vertical float sensors mount in the bottom or top of a reservoir. A magnet in the float activates a reed switch inside the sensor body when the float is raised (or lowered if reversed) on the sensor body.
Flow switches connect to your GC-Pro control system to detect the presence of water flow from pumps or drains. Be aware of pump failures as soon as they happen with a simple liquid flow switch. Can be installed inline with flow up to 8 gpm or parallel to flow for larger pumps.
Detect water leaks and take action automatically before they become floods! GrowControl systems monitor leak sensors connected to the controller's discrete inputs and can be placed on floors or under piping to detect water. Operate or disable equipment and be alerted with email/sms alerts from monitoring software.
Be alerted to water leaks and shut-down pump equipment in the event of a leak. Simply wire this water leak sensor to one of the GC-Pro's four digital inputs and setup the leak sensor control.
Weather-resistant enclosure protects your GrowControl control system from dirt, dust, water, mild acids and the elements! Rugged all-polycarbonate construction is rated for indoor and outdoor use and is UV stabilized. Clear hinged door allows visibility and easy access to the controller screen. Snap latches and a seal secure the door water-tight...
Wind vane uses German Hall effect sensor for precision and durability. Many potentiometer type wind vanes have a dead spot of several degrees, friction from the sensor and a defined life span. Agrowtek's wind vanes have zero dead band, are near-zero friction and have a theoretical infinite life. Includes mounting brackets and 25 ft of outdoor ra...
Wind speed anemometer with 3 cup rotor measures wind speeds from 1 to 125 MPH. Extremely rugged for harsh conditions and sensitive to the slightest breeze. Simple two-wire connection to transmitter. Includes mounting brackets and 25 ft of outdoor rated cable. Extend sensor wires up to 100 ft from transmitter. Mount transmitter indoors up to 2,00...
Oasis Garden Hydroponics is one of the largest retail chain of hydroponic stores in the nation. We are quickly expanding on our products and locations.